Sct device updater 2.9.18311.1 serial#
Sct device updater 2.9.18311.1 drivers#
Sct device updater 2.9.18311.1 update#
Sct device updater 2.9.18311.1 zip#

When it opens, on the left side of the window there is a 'Device Manager' selection. Step 4) It may take a moment for this window to open. It will show up as a search result and you can click to open it. Step 3) Press the Windows key on your computer keyboard, and start typing 'Device Manager'. Drag that folder to the following folder on your computer: C:/Program Files (x86)/SCT/SCT Device Updater When you open it, you will see a folder inside.

Sct device updater 2.9.18311.1 zip#

Step 2) It is a zip file, so it is compressed.

Sct device updater 2.9.18311.1 drivers#

Note: IEGO2, LAMBSE2, FUELPW2, KAMRF2 can be logged if more than 1 hego is controlling fuel.Manually Installing SCT Drivers on Windows 8, Windows 8.1 or Windows 10 If you haven't dialed in Fuel yet then be sure to log these: The following are the absolute minimum PIDS you should datalog: If posting the file in your private thread simply attach the. Next go to the folder where you have saved the file and right click on it and select If you do not have a datalogging configuration file then scroll down to the bottom of this page for payloads you should consider logging.ДЄfter you have completed a log click the file icon at the top left of the program and select SAVE then select DATALOG (*.csv)Д«e sure to remember where you save the file to. Then click the little device icon with the green dot to start logging data.

Now Click the View icon at the central left upper side of the screen.

After verifying all connections are plugged in and secured out of the way click on 'Check Communications.' The xcal has to be plugged in both the laptop and the vehicle.

Next click the red plug 'Comm' icon at the upper left hand of the screen to connect to the vehicle and the device.

Strategy configuration file is available for download. cf4 SCT Livelink configuration file then check for your specific strategy file from the FORUM CATEGORIES to see if a recommended If your tuner did not provide you with a. cf4 configuration file for your strategy THAT YOUR CUSTOM TUNER HAS PROVIDED FOR YOU.

IGNORE the pop up box that automatically loads and instead click on the top left file menu and select OPEN then select CONFIGURATION.

Here is the link to downloads sct livelink II to datalog.

Now you will need to get livelink intalled. This is perfectly normal and nothing to be worried about. Step 3 - You will need to plug the xcal in to the vehicles obd-2 port and then write the custom tune to the vehicle.Д«E AWARE that the first fire up after the first write may cause your vehicle to run funny.

Sct device updater 2.9.18311.1 update#

WARNING: DO NOT UPDATE THE XCAL just update the device file only. Here is the link to the device updater to write the device file. Step 2 - You will need to then use the SCT Device Updater tool to write the device file to the xcal or SCT device.

Sct device updater 2.9.18311.1 serial#

cef device file from your custom tuner that they have written custom for your specific vehicle and have assigned to your specific device's serial number. If you have already wrote your tune to the vehicle you can skip down to Datalogging.Д«efore firing up your modified vehicle for the first time you must first write your custom tune to the handheld then to the vehicle. Tuner for review which can then be used to create. mtf calibration file can be sent to another cef device file is only useable on the SCT device it was written for andД¬annot be sent to another tuner for review nor can it be used on a different device. A calibration file (.mtf) is what your tuner SCT Logging / EFIDynoTuning SCT X4 DataloggingДevice (.cef) Files VS Calibration (.mtf) FilesДЄn SCT device file is a.